Tuesday, September 27, 2022

Where To Buy Harry Potter Monopoly

Don't Miss

Introduction: Harry Potter Monopoly

Harry Potter Monopoly DIY

Admittedly, I don’t have the time to write extremely detailed instructions for this guide. However, as a means to share my files and ideas, this is the best I can do. If you have questions, you can post here and I will try to answer, but the files included in the zip folder and uploaded here should be just about everything you need to recreate the game I made.

I highly recommend to buy a game of Monopoly that is in reasonable condition second hand. I got mine from Value Village for less than $10. This will save you from having to buy chipboard yourself which can be very difficult to work with. If you do buy a game, the most important thing is to MEASURE AND SCALE THE IMAGES. Not all games are equal in size and it is easy to have things not line up.

Putting The Files Together

Once everything is printed, use a ruler and xacto knife to cut out the cards around the borders.

If you opted not to print double sided, I recommend either using mod podge to glue them together or alternately, you can “laminate” the cards together with packing tape on either side after glue sticking the backs together.

Either option works well and it just depends on the final look you want to have.

For the main board, cut out the printed image you got from Staples and glue it to your monopoly board starting with the MIDDLE and then pressing outwards toward the edge.

Prepare And Apply Your Pathways To The Board

Time to prepare your pathways. First, you will need to test print and cut them to make sure that they both fit the game board and cover any imperfections that emerged during the center square placement.

If you are printing pathways to fit a board that is 19.25″x19.25″ , these are the printing margins that you will need to use .

  • .25″ left and right margins.
  • .5″ top and bottom margins.

Recommended Reading: What Is The Cure For Boils Harry Potter Hogwarts Mystery

Preparing And Printing Your Property Deeds

As always, you will want to print your deeds on regular paper to proofread and ensure that they are aligned correctly, both in terms of text on the cell and the alignment of the front and reverse sides.

First, you will need to tell your printer to print double-sided and flip on short edge. Be sure that your document is also in landscape printing orientation.

Once your deeds are printed, cut them out with your precision trimmer as if you were ready to play with them and thoroughly inspect them again. The black surrounding square encompassing all 6 deeds is a cutting guideline only. Try to cut just inside of this line.

Here are some important things to check for:

  • Has the correct mortgage information been printed on the back of each card?
  • Is the mortgage information on the reverse side centered on the card?
  • How does the spacing of the text and images look?
  • Is there enough contrast between the text and the colored property square? You might want to have some titles appear in white to enhance readability.

Print And Test Your Center Design

MONOPOLY HARRY POTTER EDITION BUY

Once your image is designed, test out your image size on regular or scrap paper.

  • If the center of your board measures 14″x14″ , we will manipulate your designing program to print the image on as few Avery labels as possible. In Paint , access the print page setup menu.
  • Once you are in the Print Page set up, set your page orientation to portrait.
  • Now, make sure that your printer is set to the following margins:
  • .75″ on the left and right margins
  • .5″ on the top and bottom margins
  • These margins will print you an image on four sheets of paper. You will notice that more of the image is printed on two sheets .
  • Print the image.
  • Cut these printed images out with your precision cutter and lay them on your board to make sure the sizing looks good for your board. The goal is to have the image centered while also leaving enough room for your play squares .
  • Having on old Monopoly board makes this step particularly easy because your measurements are already done for you. If they are not already done for you, see the next step for measurement guidance.
  • If your image is too large, you can play with the margins provided above to get it to a size that works for your game board.
  • Also Check: Who Plays Lord Voldemort In Harry Potter

    Applying The Center Image To The Game Board

    Once you are happy with the test copies of your center image, it is time to print the final copies onto your adhesive labels. When cutting your labels, it is especially important that you leave white “tabs” on the sides of your images. Here’s how to strategize where to place your tabs.

  • I decided to lay down my bottom left image first, and so I left a tab on the top and right of my image.
  • My bottom right label was second, and so I left a tab on top because my third image would be my top right corner.
  • Your third label will require a tab in the direction of your final corner.
  • Your fourth label will require no tabs whatsoever.
  • Design Your Center Image

    You’ll need to pay close attention to measurements when designing your game board. I personally designed the center portion of my game board first . The most important features of the main space on the board are the title and your community chest and chance card holder spaces.

    As you can see, I have renamed the game Pottopoly and the action card spaces Potions and Charms. Whatever you decide on calling these cards in this step, you will have to stick with it because you will later use the same name on the action spaces on the board as well as the cards themselves.

    I recommend creating your graphics on a canvas that is twice the size of what you actually need it to be, so when you scale your image to size, the quality will remain. Note: The more complex you create your game board, the more difficult the label application process will be.

    You can download the Lumos and Harry Potter fonts online, which I used on all aspects of the game . For instructions on how to install this font into Windows 10, .

    IMPORTANT: The more complex your center design is, the more important it will become in the next stages that you lay down the images perfectly. If you’re a bit nervous about this, try to make your image less complex.

    You May Like: How Long To Watch All Harry Potter Movies

    Designing Your Play Spaces

    It’s time to design your pathways !

  • Measure the exposed surface area of your game board. This space will be used for the game play spaces. Next, create a template either by hand or on your computer.
  • Note: If designing by computer, I recommend creating a template that is double the size to ensure quality images. If your image went down crooked, you might need to increase the size of your borders to cover these imperfections.
  • Create a template that is twice the size you need it.
  • The provided template above is intended for a Monopoly board . Because of quality, however, it is double the size needed . I have also made this template 1/8″ larger than necessary to help you accommodate your errors.
  • Plan ahead! Take a look at a Monopoly board to see what kinds of spaces you need to fill. Some examples include:
  • Property Spaces
  • Printing The Final Copy Of Your Deeds

    DIY | Harry Potter Monopoly

    Once you have made the proper adjustments to your cards and are happy with their appearance, it’s time to print them for real onto white 8.5″ x 11″ card stock. The kind I have is a 65 lb. weight paper, which is durable enough for our purposes.

    Let the ink dry on your cards for about 6 hours.

    When cutting your deeds, be sure to:

    • Cut with the front of the deeds facing upward, so you can see what you’re doing.
    • Cut inside of the major square containing all of the deeds
    • Cut each card directly in the center of the blank spaces between each cell. There should be white spaces on the sides of your deed. That black border is intentional and should be shown on your card.

    You May Like: Harry Potter Online Test

    Man Builds Incredible Monopoly Set For His Harry Potter Obsessed Girlfriend

    18:51, 30 April 2020 BST| Last updated 10:45, 26 August 2020 BST

    An ingenious boyfriend created an incredible home-made Monopoly set for his Harry Potter obsessed girlfriend to keep them both amused while they’re stuck inside during the coronavirus lockdown.

    Hey, we’ve all got to find ways to keep ourselves amused, haven’t we?

    While playing Monopoly is something of a gamble – who hasn’t had a huge family-shattering row over Christmas? – you have to admit, it’s a thing of beauty.

    However, it’s something they can both enjoy, as Chloé explained: “Harry Potter has just been a series I’ve always loved.

    “I read each of the books when they first came out and since the films came out I’ve also watched them a ridiculous amount of times too.

    “Alex does enjoy it though. As much as he has made this game for me, it’s definitely for him too.”

    She continued: “We played the normal Monopoly again recently and started discussing how good a Harry Potter Monopoly would be as there would be so many choices for places to put on the game board.

    “We both had a look online and couldn’t seem to find an official one anywhere to get in the UK. The only ones we found were other home-made versions.”

    Well, they can’t have been any better than this one. It’s some seriously impressive craftsmanship.

    Alex told us: “I knew the Easter Holidays were coming up and that we wouldn’t be able to go out due to the lockdown, so I thought this could be a good time to do this project.

    Introduction: How To Make A Harry Potter Monopoly Board Game

    I absolutely love making customized board games, and I got the idea to turn one of the most strategic games into a Harry Potter-themed gaming experience. Why play the same old Monopoly with the same old chance and community chest cards when you could invent your own with some surprising twists and turns taken right from your favorite book and film franchise?

    I call it … Pottopoly! Enjoy!

    Thank you all for voting! We won 2nd prize in the Wizarding Contest!

    Pottopoly is now ON SALE! Visit my Etsy shop here to score your very own copy of Pottopoly before they’re gone!

    You May Like: When Are Harry Potter Vans Coming Out

    Design Your Property Deeds

    NOTE: I’ve just been notified that the links to all of my files do not work for some reason. You can access them here.

    You will need to create property deeds that match the spaces on your game board. For this step, you will need a Word processor if you wish to create your deeds digitally. I have provided blank templates that are approximately the size of traditional Monopoly deeds for you to create your won.

    Each double-sided property card is composed of 3 aspects:

  • The title of the property on the correctly colored label
  • Rent, cottage, and castle information
  • And mortgage information
  • I have copied the purchase/rent/mortgage amounts found on the regular Monopoly, but if you have changed these values on your actual game spaces, you will need to invent these values. On the provided examples, you can see how I have organized this information.

    Note: If you attempt to open the designed word file without having downloaded and properly installed the Lumos font, the deeds’ sizing, spacing, and layout may be altered.

    Fill in the correct information .

    Apply Your Pathway Labels

    HARRY POTTER MONOPOLY MONEY PDF

    This session of adhesion is perhaps the most difficult because it will determine the overall look and feel of your board. You will definitely want to use the edge of your game board to help you place these labels neatly .Tips for Adhesion: Make use of the conveniently-backed Avery adhesive labels. Take off each section in portions to ensure maximum control over how the labels are adhered.After placing your labels, run your hand over the corners and edges to make sure that the labels are firmly attached. If you have a folding board, fold your board now gently to make sure that your graphics remain in place.If your corners lift, you might want to consider adding a dab of fabric glue under the edge to further fasten the images to the board. If you find a piece that has not been covered by graphics, such as the remainder of a white label tab, you can simply color in the imperfections with sharpies and/or markers.

    You May Like: How To Do Your Hair Like Hermione

    More articles

    Popular Articles